Stahl Wire Rope Hoists

Product Highlights

  • 5 frame sizes, 26 load capacity variants
  • Stationary design or different trolleys and crabs for cranes and systems manufacture
  • U-shape makes for compact dimensions
  • Largely maintenance-free, low wear, service life
  • Equipped as standard with two hoisting and travel speeds
  • Particularly smooth starting and braking characteristics
  • Standard high-quality safety components for increased safety at work
  • Optionally available in explosion-protected design in compliance with ATEX and IECEx

The SH wire rope hoist programme has been the embodiment of perfection in lifting and crane technology all over the world for many years. Compact, high-performing and particularly maintenance-friendly. Users, crane manufacturers and system manufacturers appreciate the modular system based on field-proven, low-maintenance components. Series manufacture of the standard components means economic advantages for you. And this combined with precise manufacture of off-standard components makes the SH wire rope hoist a widely acknowledged top quality product.

The modular system permits practically unlimited combinations of the sub-assemblies to produce your individual solutions. The SH series from STAHL CraneSystems is available for the load capacity range from 500 kg to 25,000 kg in five frame sizes with 26 load capacity variants. The wire rope hoists can be used as stationary models or together with a trolley or crab in standard cranes, off-standard cranes or systems manufacture. If your requirements are exceptional, the experts in our engineering department will develop customised solutions tailored to them.

Various off-standard designs are available for use in particular conditions. IP 66 protection for example is required for outdoor use without a protective roof or if the hoist is exposed to water jets. If there is a danger of the formation of condensation, or in arctic temperatures, space heaters are required. Even in explosive atmospheres you do not have to manage without the SH wire rope hoist. On request, the entire wire rope hoist programme is available in explosion-protected design for Zone 1, Zone 2, Zone 21 or Zone 22. It’s no coincidence that we are market leader for explosion-protected lifting technology and crane components.

R&M Wire Rope Hoists

Product Highlights

The Spacemaster® SX represents an innovative design that includes a large drum diameter giving Spacemaster®
SX hoists the lowest headroom and best wheel loads in the industry while providing near true vertical lift with
single reeved hoists, and both exceptional hook approaches and heights of lift.

Standard configurations include normal headroom, low headroom and double girder trolley designs. Hoists in
short ton ratings (ASME) or metric ratings (FEM) meet a wide variety of application requirements:

  • 1/2 – 80 ton (500 – 80,000 kg) capacities
  • Lifts starting at 13ft (4m) to 320ft (100m) and beyond
  • Lifting speed range 10/1.5 to 62/10 fpm (3/0.5 – 19/3 m/min)
  • 208, 230, 460, 575/3/60 or 380/3/50 power supply
  • Single-reeved or double-reeved
  • Two-component epoxy paint
  • CSA c/us rating as well as a NEMA 3R rating for electrical enclosures
  • Designed to meet and exceed either ASME H3 or ASME H4 duty (FEM 1Am, 2m, or 3m) ratings

R&M Electric Chain Hoists

  • 1/8 to 2 ton capacities (125 kg – 2000 kg) / Single fall up to 1 ton (1000 kg), two fall up to 2 tons (2000 kg)
  • 10, 15 and 20 ft. (3, 4.5 and 6 m) lifts standard; additional lifting heights available up to 98 ft. (30 m) single fall, 49 ft.(15 m) two fall
  • Two-speed TMU trolley drive unit (trolley speed is 80/20 FPM)
  • Trolley brake, drop lugs and bumpers are standard
  • Variable frequency drive option on TMU
  • Various hoist suspensions including hook, push trolley & motorized trolley (TMU)
  • Disc brake positioned after the mechanical overload device (clutch); on the load path
  • High density polyethylene black chain container
  • Two or three step helical gear

RWM Electric Chain Hoists

Product Features

  • Highest quality manufacturing standards
  • Continuous improvements and quality control
  • Extremely compact size giving the best possible closed headroom
  • exceptional quality and high levels of reliability
  • Designed to lift loads from 1000 kg to 5000 kg in a production environment
  • Manufactured completely from aluminium and steel with no plastic components
  • Simple installation and maintenance
  • Highest quality manufacturing standards
  • Continuous improvements and quality control

The reliability of RWM as manufacturer of electric chain hoists is confirmed by the CE and CSA marks. Every hoist is proof load tested before being delivered to the customer.

RWM hoist are constructed in full compliance with the following standards:

  • Machinery Directive 98/37/CE.
  • Low Voltage Directive (LVD) EEC/73/23.
  • Electromagnetic Compatibility Directive (ECD) EEC/89/336–EEC/92/31.
  • CSA (CLASS 9041 01 – Cranes and Hoists).

RWM hoists are distributed with the following documents:

  • Certificate of Conformity (enclosure IIA).
  • Manufactures statement (enclosure IIB).
  • Certificates for the electromagnetic compatibility, load chain and hook.
  • Installation and Maintenance manual.
  • 2 year warranty from date of delivery.
  • 53 load capacity options
  • Low-headroom European designed foot mounted, monorail hoists or double girder trolley hoists
  • U-shape makes for compact dimensions
  • Largely maintenance-free, low wear, service life
  • Equipped as standard with two hoisting and travel speeds Particularly smooth starting and braking characteristics
  • Standard high-quality safety components for increased safety and work