Posted on

Low Headroom Jib Cranes Model WC-180

Download Product Brochure

    Nature of Enquiry

    Jib to Column Mounting Pattern


    All dimensions are in [inches] | Hardware for Detail “A” by others

    Specifications



    * Dimensions are subject to change without notice.
    All our jib cranes have been pre-engineered to the highest standards available and welded to Canadian Standard CSA W47.1. Our parent company, The Dressor Group Ltd. is certified to CSA W59.

    Download Product Brochure

      Nature of Enquiry
      Posted on

      Jib Crane – Wall Bracket Series WB-180

      The excellent design and heavy duty construction of SWL jib cranes provide a superior quality product that will offer years of long term value.
      All SWL jib cranes are pre-engineered for powered hoist operation. The hoist and trolley allowance is 15% of the capacity.
      Download Product Brochure

        Nature of Enquiry

        Specifications

        Bolt Mounting Pattern

        1. Do not deviate from “B” dimension
        2. The “W” dimension indicates the size S-beam to be used. If a cap channelneeds to be stitch welded to the top of the S-beam, the letter “C” will follow the S-beam size. The last number indicates the size of the cap channel.
        3. The diagram to the right, details the thrust and pull forces that this jib craneapplies to the supporting structure when a load is lifted. The chart above detailsin pounds the thrust at point T and the pull at point P. It is essential that astructurally adequate wall, column or truss exist to support the jib crane.
        4. One tie rod required per crane. Tie rods threaded 6 inches on each end.

        Download Product Brochure

          Nature of Enquiry
          Posted on

          Work Station Cranes – Free Standing

          • 1/2 ton to 1 ton systems use 3/4″ NC B7 Alloy Threaded Rod or Grade 8 by 10″ long
          • For 2 ton jib cranes use 7 /8″ NC B7 Alloy Threaded Rod or Grade 8 by 10″ long
          • Rods must be rust free with clean threads and well oiled to achieve proper torque.
          • For 3/4″ well oiled rods the torque spec is 280 foot lbs.
          • For 7 /8″ well oiled rods the torque spec is 450 foot lbs.
          Download Product Brochure

            Nature of Enquiry

            Specifications

            Download Product Brochure

              Nature of Enquiry